Reference
HowToGuides
Manuals
LabAlumni
DataAnalysis
Advice for...
Admin
This is an old revision of the document!
Probe Site Maps
http://www.neuronexustech.com/images/Electrode%20Site%20Map/A64%20Maps.pdf
Neuronexus Impedance Charts
https://www.dropbox.com/s/prq5ze6qm756q04/2013_03_25_19_36_28.pdf
Si Probe Plating
Use SIFCO Non-cyanide gold solution (Part Number 5355).
For plating parameters, use the GUI for the Nano-Z. Current is set for 1.5 uA. Target impedance is 400 Kohm at 1004 Hz for a max of 5 runs. Use 1 second intervals with 1 second pauses. Use 'Match Impedances' mode.